CAP核电机组高压水过滤器壳体研制

辐射防护 ›› 2023, Vol. 43 ›› Issue (6): 634-641.

CAP核电机组高压水过滤器壳体研制

孔海霞¹, 景旭斌², 李源¹, 卞向南², 乔太飞¹, 王佳¹

1.中国辐射防护研究院,太原 030006;
2.上海核工程研究设计院有限公司,上海 200233

收稿日期:2022-07-06 出版日期:2023-11-20 发布日期:2023-12-25
作者简介:孔海霞(1979—),女,2004年硕士毕业于太原理工大学工业催化专业,研究员。E-mail:khx94824@163.com

Development of high pressure water filter housing for CAP nuclear power unit

KONG Haixia¹, JING Xubing², LI Yuan¹, BIAN Xiangnan², QIAO Taifei¹, WANG Jia¹

1. China Institute for Radiation Protection,Taiyuan 030006;
2. Shanghai Nuclear Engineering Research and Design Institute Co. Ltd.,Shanghai 200233

Received:2022-07-06 Online:2023-11-20 Published:2023-12-25

摘要/Abstract

摘要： 放射性水过滤器是保障核电机组冷却剂回路良好水质控制、降低辐射剂量的重要设备。研制的适用于第三代CAP系列核电机组的非核级高压过滤器壳体,严格按照ASME BPVC-Ⅷ进行壳体和功能部件的设计;采用ANSYS 14.0分析软件建立壳体的有限元模型,通过各种载荷条件下的力学性能分析,各部件完全满足结构完整性和Ⅱ级抗震要求;生产制造的壳体通过约1.25倍设计压力下的水压试验,焊缝处无任何泄漏和变形,可以替代进口产品。

关键词: 冷却剂回路, CAP核电机组, 高压水过滤器, 壳体

Abstract: Radioactive water filter is an important equipment to ensure good water quality control and to reduce radiation dose in coolant circuit of Nuclear Power Unit. This paper developed a non-nuclear high pressure filter housing suitable for the third generation CAP Nuclear Power Unit, and the housing and its function components are designed in strict accordance with ASME BPVC-Ⅷ; finite element model of the housing is established by ANSYS 14.0 analysis software, and all the components fully meet the structural integrity and class II seismic requirements through the mechanical performance analysis under various load conditions; the manufactured housing has passed the hydrostatic test under about 1.25 times the design pressure, and there is no leakage and deformation at the weld, which can completely replace the imported products and break the foreign monopoly.

Key words: coolant circuit, CAP nuclear power unit, high pressure water filter, housing

中图分类号:

TL75+2.3

孔海霞, 景旭斌, 李源, 卞向南, 乔太飞, 王佳. CAP核电机组高压水过滤器壳体研制[J]. 辐射防护, 2023, 43(6): 634-641.

KONG Haixia, JING Xubing, LI Yuan, BIAN Xiangnan, QIAO Taifei, WANG Jia. Development of high pressure water filter housing for CAP nuclear power unit[J]. RADIATION PROTECTION, 2023, 43(6): 634-641.

参考文献

[1] 李培元,周柏青.发电厂水处理及水质控制[M].北京:中国电力出版社,2012:543-589.
[2] 孔海霞,史英霞,侯建荣,等. 国内核电站放射性水处理系统用水过滤器滤芯现状和探讨[J]. 辐射防护,2015,35(3):163-169.
KONG Haixia,SHI Yingxia,HOU Jianrong,et al. Water filter element used in radioactive water treatment systems of domestic nuclear power plant[J]. Radiation Protection,2015,35(3):163-169.
[3] 乔太飞,孔海霞,史英霞,等. 国内核电厂水过滤器滤芯标准现状与讨论[J]. 辐射防护,2018,38(2):155-159.
QIAO Taifei,KONG Haixia,SHI Yingxia,et al. Status and discussion of standards for water filter elements used in nuclear power plants[J]. Radiation Protection,2018,38(2):155-159.
[4] 任杰,王连生,张雪辉. 秦山三期核电站核级过滤器滤芯升级研究[J]. 景德镇学院学报,2021,36(6):22-25.
REN Jie,WANG Liansheng,ZHANG Xuehui. Research on upgrading the nuclear filter element of qinshan nuclear power plant Ⅲ[J].Journal of Jingdezhen University,2021,36(6):22-25.
[5] 孙汉虹,程平东,缪鸿兴. 第三代核电技术AP1000[M]. 北京:中国电力出版社,2010:319.
[6] 郑明光. 压水堆国家重大专项与CAP1400型号研发[J]. 南方能源建设,2015,2(4):3-7.
[7] 李源,王佳,刘夏诚,等. AP/CAP系列核电机组放射性水处理用水过滤器滤芯的研制[J]. 辐射防护通讯,2022,42(2):14-20.
LI Yuan,WANG Jia,LIU Xiacheng,et al. Development of AP/CAP series nuclear power unit for radioactive water treatment water filter element[J]. Radiation Protection Bulletin,2022,42(2):14-20.
[8] 游祥飞,顾㑳宙,孟雷,等. AP1000核电机组主回路相关水过滤器滤芯更换和转运操作工艺研究及相关设备设计[J]. 辐射防护通讯,2017,37(1):1-7.
YOU Xiangfei,GU Zhouzhou,MENG Lei,et al. Process research and related equipment design for primary loop related water filter cartridge replacement and transport of AP1000 nuclear power unit[J]. Radiation Protection Bulletin,2017,37(1):1-7.
[9] ASME. Rules for construction of pressure vessels: with addenda through 2008 addendum:ASME BPVC-Ⅷ—2007[S]. 2007 Edition.New York:The American Society of Mechanical Engineers,2008.
[10] ASME.焊接和无缝轧制钢管:ASME B36.10M—2015[S]. 中石协ASME规范产品专业委员会(CACI)译. 北京:中国石化出版社,2016.
[11] 张建伟,白海波,李昕. ANSYS 14.0超级学习手册[M]. 北京:人民邮电出版社,2013.
[12] ASME. Rules for construction of nuclear power plant components:ASME BPVC-Ⅷ[S]. 2010 Edition.New York:The American Society of Mechanical Engineers,2010.