低中放废物玻璃固化体性能要求及测试方法探讨

辐射防护 ›› 2021, Vol. 41 ›› Issue (1): 50-57.

低中放废物玻璃固化体性能要求及测试方法探讨

甘学英, 徐春艳, 方岚, 汪世军, 何玮, 刘新华

生态环境部核与辐射安全中心,北京 100082

收稿日期:2020-03-19 出版日期:2021-01-20 发布日期:2021-03-15
通讯作者: 汪世军。E-mail:awangshj@sohu.com
作者简介:甘学英(1970—),男,1994年毕业于兰州大学放射化学专业,正高级工程师。E-mail:xygar@126.com
基金资助:
大型先进压水堆及高温气冷堆核电站国家科技重大专项《先进压水堆便于退役的要求研究》(编号:2018ZX06002005)资助。

Investigation on performance requirements and test methods oflow and intermediate vitrified radioactive waste

GAN Xueying, XU Chunyan, FANG Lan, WANG Shijun, HE Wei, LIU Xinhua

Nuclear and radiation Safety Center, Ministry of Ecology and Environment, Beijing 100082

Received:2020-03-19 Online:2021-01-20 Published:2021-03-15

摘要/Abstract

摘要： 为了减少废物体积,提升废物处置安全,将玻璃固化技术用于低中放废物的处理。低中放废物玻璃固化体性能要求及测试方法,我国目前缺少相应的标准。本文通过废物固化体标准和公开发表的相关测试数据对比分析,给出了低中放废物玻璃固化体的性能要求和测试方法的建议。

关键词: 低中放废物, 玻璃固化体, 浸出率, 性能测试

Abstract: Vitrification technologies were applied in the treatment of low and intermediate-level radioactive wastes for waste volume reduction and the improvement of waste disposal safety. The relevant standard of performance requirements and test methods for the low and intermediate vitrified radioactive waste are absence in China currently. The performance requirements and test methods were suggested by comparison analysis with several waste form standards and some relevant published test data.

Key words: low and intermediate vitrified radioactive waste, leaching rate, performance test method

中图分类号:

TL941+.113

甘学英, 徐春艳, 方岚, 汪世军, 何玮, 刘新华. 低中放废物玻璃固化体性能要求及测试方法探讨[J]. 辐射防护, 2021, 41(1): 50-57.

GAN Xueying, XU Chunyan, FANG Lan, WANG Shijun, HE Wei, LIU Xinhua. Investigation on performance requirements and test methods oflow and intermediate vitrified radioactive waste[J]. RADIATION PROTECTION, 2021, 41(1): 50-57.

参考文献

[1] Ojovan M I,Batyukhnova O G.Glasses for nuclear waste immobilization[C]//WM’07 Conference,Tucson AZ.2007,February 25—March 1.
[2] Sobolev I A,Dmitriev S A,Lifanov F A,et al.Vitrification processes for low,intermediate radioactive and mixed wastes [J].Glass Techno,2005,46 (1):28-35.
[3] Sung II Kim,Kun Jai Lee.Economic assessment on vitrification facility of low-and intermediate-level radioactive wastes in Korea[C]//WM’03 Conference,Tucson AZ,2003,February 23-27.
[4] The Republic of Korea.Korean fifth national report under the joint convention on the safety of spent fuel management and on the safety of radioactive waste management[R].Korean,2014:14.
[5] Jiawei Sheng,Kwansik Choi,Myung-Jae Song.Vitrification of liquid waste from nuclear power plants[J].Journal of Nuclear Materials,2001,297 (1):7-13.
[6] 朱冬冬,刘丽君,郄东生,等.冷坩埚玻璃固化熔炉启动工艺研究[J].原子能科学技术,2018,52(12):2222-2225.
ZHU Dongdong,LIU Lijun,QIE Dongsheng,et al.Research on start-up process of cold crucible induction melter for vitrification[J].Atomic Energy Science and Technology,2018,52(12):2222-2225.
[7] 林鹏,秦余新,吕永红,等.放射性废物热等离子体处理熔融炉温度分布数值模拟及熔渣玻璃化配方初步研究[J].辐射防护,2013,33(4):262-266.
LIN Peng,QIN Yuxin,LV Yonghong,et al.Temperature simulation of thermal plasma melting furnace for disposal of radioactive waste and preliminary research of vitrification formula[J].Radiation Protection,2013,33(4):262-266.
[8] 程昌明,兰伟,陈伦,等.石棉废物等离子体高温熔融实验研究[C]//四川省核学会核聚变与低温等离子体应用专业委员会2014年度学术交流会.2014:10.
[9] 林鹏,陆杰,刘夏杰,等.核电厂典型中低放射性废物等离子熔融处理试验研究[J].中国材料进展,2016,35(7):504-508.
LIN Peng,LU Jie,LIU Xiajie,et al.Intermediate and low level radioactive wastes from nuclear power plant[J].Materials China,2016,35(7):504-508.
[10] 杨彬,曹骐.石棉玻璃固化体性能测试标准方法浅析[J].标准建设,2016,(7):12-14.
YANG Bin,CAO Qi.Preliminary analysis on the standard testing method for the performances of the vitrification asbesto waste form[J].Standard Construction,2016,(7):12-14.
[11] 核工业标准化研究所.放射性废物体和废物包的特性鉴定:EJ 1186—2005[S].北京:国防科学技术工业委员会,2005.
[12] ASTM.International,Standard test method for static leaching of monolithic waste forms for disposal of radioactive waste:ASTM C1220[S].Philadelphia,1998.
[13] 环境保护部核与辐射安全中心,中国辐射防护研究院.低、中水平放射性废物固化体性能要求——水泥固化体:GB 14569.1—2011[S].北京:中国环境科学出版社,2011.
[14] 中国原子能科学研究院.低、中水平放射性废物固化体性能要求——塑料固化体:GB 14569.2—1993[S].北京:中国标准出版社,1994.
[15] 中国原子能科学研究院.低、中水平放射性废物固化体性能要求——沥青固化体:GB 14569.3—1995[S].北京:中国标准出版社,1996.
[16] 东华大学国家眼镜玻璃搪瓷制品质量监督监察中心.玻璃密度测定浮力法:GB/T 5432—2008[S].北京:中国标准出版社,2009.
[17] 中国建筑材料科学研究院水泥科学与新型建筑材料研究所.水泥胶砂强度检验方法(ISO法):GB/T 17671—1999[S].北京:中国标准出版社,1999.
[18] 国家合成树脂质量监督检查中心,广州合成材料研究院有限公司.塑料压缩试验方法:GB/T 1041—2008[S].北京:中国标准出版社,2008.
[19] 中国建筑材料科学研究院,深圳新三思计量技术有限公司.精细陶瓷压缩强度试验方法:GB/T 8489—2006[S].北京:中国标准出版社,2006.
[20] 电子工业部4400厂.电子玻璃高温粘度测试方法:SJ/T 11040—1996[S].北京:中华人民共和国电子工业部,1996.
[21] Lifanov F A,Sobolev I A,Dmitriev S A,et al.Vitrification of low and intermediate level waste:technology and glass performance[C]//WM ’04 Conference,Tucson,AZ.2004,February 29-March 4.