辐射防护 ›› 2015, Vol. 35 ›› Issue (4): 243-247.

• 经验交流 • 上一篇    下一篇

CPR1000机组固体废物处理系统及其调试

陆科峰1, 钟香斌1, 李超2, 张鹏1, 卢忠诚1   

  1. 1.中广核工程有限公司,广东 深圳 518124;
    2.深圳中广核工程设计有限公司,广东 深圳 518057
  • 收稿日期:2014-08-26 出版日期:2015-07-20 发布日期:2024-10-21
  • 作者简介:陆科峰(1983—),男,2006年毕业于南京大学环境工程专业,工程师。E-mail: lukefeng@cgnpc.com.cn

Design and commissioning of solid radioactive waste treatment system for CPR1000 Nuclear Power Plants

Lu Kefeng1, Zhong Xiangbin1, Li Chao2, Zhang Peng1, Lu Zhongcheng1   

  1. 1. China Nuclear Power Engineering Co. Ltd., Guangdong Shenzhen 518124;
    2. Shenzhen China Nuclear Power Design Co. Ltd., Guangdong Shenzhen 518057
  • Received:2014-08-26 Online:2015-07-20 Published:2024-10-21

摘要: CPR1000核电机组固体废物处理系统负责电站运行期间产生的各类固体放射性废物的收集、贮存及处理,系统涉及水泥固化、混凝土固定、超级压缩处理等废物处理工艺。本文就系统处理源项、系统工艺流程、系统调试启动进行介绍,并着重就CPR1000机组固体废物处理系统与目前国内其它电站的差异性进行论述,对其存在的不足及后续系统改进优化提出合理化提议。

关键词: CPR1000核电站, 放射性固体废物, 废物处理, 水泥固化

Abstract: Solid radioactive waste treatment system is designed to collect and treat spent resins, concentrate, spent filter cartilages and other solid radioactive waste produced by CPR1000 units. The system consists of two subsystems, cementation and compaction, involving cementation, grouting, and super compaction processes. Radioactive waste resources, technological processes, system commissioning and performance of cemented waste forms are introduced in the paper, with special focus on difference analysis comparing with treatment system adopted in other NPPs. Suggestions on system improvement are briefed at last.

Key words: CPR1000 Nuclear Power Plants, solid radioactive waste, cementation, super compaction

中图分类号: 

  • TL941