利用数值模拟方法研究树脂裂解反应器的进气结构

摘要/Abstract

摘要： 利用数值模拟的方法,考察了树脂裂解反应器上部进气方式的效果,发现存在空气利用率低的问题,同时空气还会带走反应器内的大量热量,削弱树脂裂解反应区域的温度,由此证明了试验推论的正确性。同时,利用数值模拟的方法,对设备进气方式进行优化改进:当采用下部进气后,空气的利用率得到明显的提升,空气分布也较为均匀。但此时,空气对反应区域内温度的削弱作用也更为明显。此外,随着设备进气口直径的减小和进气口数量的增加,能够较为明显地提高树脂反应区域的空气分布均匀度,而提升设备的加热功率,对提高反应区域内的温度有显著的作用。

关键词: 树脂, 裂解反应器, 进气方式, 数值模拟, 优化设计

Abstract: The effect of the upper air intake mode of a resin decomposition reactor in China Institute for Radiation Protection (CIRP) was investigated through numerical simulation method. It was found with this kind of simulation that there are some problems such as low air utilization rate, heat loss caused by air flow, and temperature decrease in resin decomposition reaction zone. The air intake mode of the equipment was improved through the numerical simulation method with a lower air intake mode which resulted in better air utilization rate and more uniform air distribution. However, in this case, the weakening effect of air on the temperature in reaction zone was also more obvious. In addition, as the diameter of the air inlet of the device decreases and the number of air inlets increases, the air distribution uniformity of the resin reaction zone can be significantly improved, and increasing the heating power of the device has a significant effect on increasing the temperature of reaction zone.

Key words: intake mode, numerical simulation, optimization design

中图分类号:

TL941

张禹, 徐卫, 褚浩然, 郑博文, 阮佳晟, 侯伯南. 利用数值模拟方法研究树脂裂解反应器的进气结构[J]. 辐射防护, 2020, 40(5): 435-442.

ZHANG Yu, XU Wei, CHU Haoran, ZHENG Bowen, RUAN Jiasheng, HOU Bonan. Study on air intake structures of a resin decomposition reactor through a numerical simulation method[J]. RADIATION PROTECTION, 2020, 40(5): 435-442.

参考文献

[1] 严沧生, 梁永丰, 战仕全. 放射性废树脂处理技术工程应用的选择[J]. 辐射防护, 2016, 36(04): 232-239.
YAN Cangsheng, LIANG Yongfeng, ZHAN Shiquan. Treatment technique selection of radioactive spent resin for engineering application[J]. Radiation Protection, 2016, 36(04): 232-239.
[2] 罗上庚. 放射性废离子交换树脂的处理技术[J]. 辐射防护, 1992,12(05): 398-404.
LUO Shanggeng. Treating technique of radioactive spent ion exchange resin[J]. Radiation Protection, 1992,12(05): 398-404.
[3] 潘跃龙, 张志东, 柴涛. 超临界水氧化处理核电站废阴离子交换树脂研究[J]. 辐射防护, 2019, 39(05): 410-415.
PAN Yuelong, ZHANG Zhidong, CHAI Tao. Study on supercritical water oxidation of waste anion resin used in a nuclear power plant[J]. Radiation Protection, 2019, 39(05): 410-415.
[4] 高帅, 郭喜良, 高超. 放射性废树脂处理技术[J].辐射防护通讯, 2014, 34(01): 28-33.
GAO Shuai, GUO Xiliang, GAO Chao. The process of spent resin treatment[J]. Radiation Protection Bulletin, 2014, 34(01): 28-33.
[5] 徐卫, 张禹, 褚浩然. 放射性废离子交换树脂高温裂解处理技术研究[J]. 辐射防护, 2019, 39(05): 396-402.
XU Wei, ZHANG Yu, CHU Haoran. Study on pyrolysis treatment technology of radioactive spent ion exchange resin[J]. Radiation Protection, 2019, 39(05): 396-402.
[6] Bear J. 多孔介质流体动力学[M]. 北京: 中国建筑工业出版社, 1983: 10-11.
[7] Pastore N, Cherubini C, Rapti D. Experimental study of forced convection heat transport in porous media[J]. Nonlinear Processes in Geophysics, 2018, 25(2): 1-25.
[8] 赵军, 朱庆强, 范德顺. 多孔介质模型的纤维球过滤器数值模拟[J]. 化工机械, 2012, 39(03): 343-346.
ZHAO Jun, ZHU Qingqiang, FAN Deshun. Numerical simulation on fiber ball filter for porous media model[J]. Chemical Engineering and Machinery, 2012, 39(03): 343-346.
[9] Flori M, Vilceanu L. CFD numerical simulation of air natural convection over a heated cylindrical surface[J]. IOP Conference Series: Materials Science and Engineering, 2015, 85(1): 012012.