反应型压制去污剂喷洒数值模拟与试验研究

辐射防护 ›› 2019, Vol. 39 ›› Issue (4): 304-308.

反应型压制去污剂喷洒数值模拟与试验研究

张坤^1,2, 何泽银³, 张涛³, 杨川³, 华卫星⁴, 曹兴伟², 刘慧开⁵

1.国民核生化灾害防护国家重点实验室,北京 102205;
2.国防工程研究院,河南洛阳 471023;
3.重庆交通大学, 重庆 400074;
4.陆军勤务学院,重庆 4013113;
5.中国人民解放军92609部队,北京 100036

收稿日期:2018-07-17 出版日期:2019-07-15 发布日期:2019-10-29
通讯作者: 何泽银。E-mail:zeyin_he@126.com
作者简介:张坤(1984—),男,2012年毕业于后勤工程学院油气储运工程专业,获硕士学位,工程师,博士在读。E-mail:596957833@qq.com
基金资助:
河南省科技创新杰出人才基金 (154200510029);放射性污染清除材料与装备技术河南省工程实验室; 河南省特种防护材料重点实验室。

Numerical simulation and experimental studyon reactive coating decontaminant spray

ZHANG Kun^1,2, HE Zeyin³, ZHANG Tao³, YANG Chuan³, HUA Weixing⁴, CAO Xingwei², LIU Hukai⁵

1. State Key Laboratory of NBC Protection for Civilion, Beijing 102205;
2. National Defence EngineeringInstitute, Henan Luoyang 471023;
3. Chongqing Jiaotong University, Chongqing 400074;
4. Guilin Joint Logistics Center, Unit 76117 Army, Hunan Hengyang 421002;
5. Unit 92609 of the Chinese People’s Liberation Army, Beijing 100036

Received:2018-07-17 Online:2019-07-15 Published:2019-10-29

摘要/Abstract

摘要： 针对目前反应型压制去污剂喷洒作业中常出现喷嘴堵塞问题,提出一种压缩空气喷洒反应型压制去污剂的作业方法,设计了一种喷洒专用喷头。建立喷头喷洒过程流体分析模型,基于计算流体动力学方法(CFD)对喷头在不同入口压力下的内部流场压力、流速及喷洒状态进行了模拟。分析表明,当喷嘴入口压力高于2 MPa时,反应型压制去污剂的喷洒雾化均匀。为验证结构设计及分析模型的合理性,搭建喷洒试验装置,对反应型压制去污剂喷洒性能开展了试验研究。实际喷洒效果与仿真结果较为接近;去污剂的喷洒雾化较为均匀,喷洒效果较好。

关键词: 去污剂, 喷头设计, 数值模拟, 试验研究, CFD

Abstract: To solve the problem of nozzle blockage in spraying operation of a reaction type coating decontaminant, a method of spraying reactive coating decontaminant with compressed air was proposed, and a special spraying nozzle was designed. A fluid analysis model of nozzle spraying process was also established, and its pressure, velocity and spraying state of the internal flow field of nozzle under different inlet pressures were simulated based on a CFD method. The analysis shows that when the nozzle inlet pressure is higher than 2 MPa, its spraying of reactive coating decontaminant is uniform. In order to verify the rationality of structure design and analysis model, a spraying test device was built, and the spraying performance of reactive coating decontaminant was tested. Its actual spraying effect was close to the simulation result. The spraying atomization of decontaminant was more uniform and spraying effect was better than before.

Key words: decontaminant, nozzle design, numerical simulation, experimental study, CFD

中图分类号:

TH451

张坤, 何泽银, 张涛, 杨川, 华卫星, 曹兴伟, 刘慧开. 反应型压制去污剂喷洒数值模拟与试验研究[J]. 辐射防护, 2019, 39(4): 304-308.

ZHANG Kun, HE Zeyin, ZHANG Tao, YANG Chuan, HUA Weixing, CAO Xingwei, LIU Hukai. Numerical simulation and experimental studyon reactive coating decontaminant spray[J]. RADIATION PROTECTION, 2019, 39(4): 304-308.

[1]	刘平 ,赵亮, 焦大丁, 王家杰, 杨鸿锐. 膨润土-砂混合物缓冲层轴向热传导性研究[J]. 辐射防护, 2020, 40(2): 126-136.
[2]	张志东,池翔宇,潘跃龙,何军山,王乃华. 树脂超临界水氧化反应器设计及数值模拟[J]. 辐射防护, 2019, 39(5): 416-422.
[3]	张坤, 何泽银, 唐伟迤, 曹兴伟, 黄霞明, 李翔. 反应型压制去污剂动态混合特性试验研究[J]. 辐射防护, 2019, 39(1): 33-39.