废树脂微波处理工艺研究

Abstract

Abstract: Microwave treatment process for spent resin utilizes microwave penetration ability and body heat characteristics.The water and organic components in spent resin will be removed,so as to change the spent resin from organic to inorganic state.Compared with the original spent resin,the drying and ashing effect of microwave will greatly reduce the volume and weight.The product from this technology is convenient for subsequent processing.Based on the study,the technological parameters of microwave drum drying and microwave ashing of spent resin are determined.

Key words: spent resin, microwave, drum drying, ashing

CLC Number:

TL941+.3

GAO Chao, AN Hongxiang, GUO Xiliang, GAO Shuai. The study on microwave treatment process for spent resin[J].RADIATION PROTECTION, 2020, 40(6): 683-690.

References

[1] 罗上庚.废树脂的优化处理[J].核科学与工程,2003,23(2):165-171.
LUO Shanggeng.Optimizing the management of spent ion exchange resin[J].Chinese Journal of Nuclear Science and Engineering,2003,23(2):165-171.
[2] 安军.废树脂焚烧处理技术研究[D].浙江大学,2007:13-28.
AN Jun.Study on waste resin incineration[D].Zhejiang University,2007:13-28.
[3] 王进华.聚四氟乙烯分散树脂的微波干燥研究[D].浙江大学,2006:23-45.
WANG Jinhua.Study on microwave drying of polytetrafluoroethylene dispersion resin[D].Zhejiang University,2006:23-45.
[4] 高超,安鸿翔,贾梅兰.放射性废树脂微波桶内干燥工艺研究[J].真空电子技术,2016,(06):54-56.
GAO Chao,AN Hongxiang,JIA Meilan.Study on microwave drum drying technology for radioactive spent resin[J].Vacuum Electronics,2016,(06):54-56.
[5] Dominic A.Davies,Christina Schnik,Jack Silver,et al.A high-yield microwave heating method for the preparation of (phthalocyaninato) bis (chloro) silicon(IV)[J].Porphyrins Phthalocyanines,2001(5).
[6] Christian Giessmann.Microwave In-Drum Drying[J].Radwaste Solutions,2007,21-24.
[7] Schulz R L,Wicks G G,Folz D C,et al.Overview of Hybrid Microwave Technology[J].Journal of the South Carolina Academy of Science,2011,9(1):25-29.
[8] Nóbregac,Ana Rita A.Nogueiraa.Microwave-assisted digestion procedures for biological samples with diluted nitric acid:Identification of reaction products[J].Talanta,2009,(79):396-401.
[9] 高超,安鸿翔,梁栋,等.核电站废离子交换树脂微波干燥可行性研究[J].环境科学与管理,2012,37(09):116-118.
GAO Chao,AN Hongxiang,LIANG Dong,et al.The pilot study on microwave drying technology for waste resin from nuclear power plant[J].Environmental Science And Management,2012,37(09):116-118.
[10] 高超,贾梅兰,高帅.微波在废树脂中的穿透厚度研究[J].环境科学与管理,2015,40(03):14-16.
GAO Chao,JIA Meilan,GAO Shuai.Study on microwave penetration thickness in spent resin[J].Environmental Science and Management,2015,40(03):14-16.
[11] 高超,高帅,安鸿翔,等.放射性废树脂微波桶内干燥控制方式研究[J].干燥技术与设备,2014,12(04):35-38.
GAO Chao,GAO Shuai,AN Hongxiang,et al.Spent radioactive resin control study on microwave drum drying[J].Drying Technology &Equipment,2014,12(04):35-38.
[12] 冯声涛,王本立,王丽红,等.生物样品快速灰化装置用于处理生物废物的可行性[J].辐射防护,1994,14(3):230-233.
FENG Shengtao,WANG Benli,WANG Lihong,et al.Using a rapid ashing apparatus of biological samples for the treatment of radioimmunoassay and biological waste[J].Radiation Protection,1994,14(3):230-233.

The study on microwave treatment process for spent resin

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Metrics

Comments

Recommended 10