RADIATION PROTECTION ›› 2020, Vol. 40 ›› Issue (6): 496-503.

• Radiation Transport and Shielding • Previous Articles     Next Articles

An optimization of shielding structure in controllable neutron sourceneutron-gamma well logging instrument

SONG Lei1, LI Fusheng1*, WANG Sheng2   

  1. 1. School of Automation Engineering,University of Electronic Science and Technology of China,Chengdu 610054;
    2. School of Nuclear Science and Technology,Xi’an Jiaotong University,Xi’an 710049
  • Online:2020-11-20 Published:2021-01-27

Abstract: Neutron-gamma well logging instrument based on controllable neutron sources is widely used in the exploration of petroleum,shale gas and minerals.During the well logging process,neutron is emitted from neutron source and interacts with the surrounding stratum’s elements.Thus,the specific gamma rays are generated and detectors within the well logging instrument can detect them.After analyzing the spectrum of gamma rays,the component of the stratum can be obtained.However,part of neutrons and gamma rays may go through the shielding structure and reach into the detector.These particles can introduce noise signals into the exploration result and reduce the accuracy of the instrument.Thus,it is important to develop an efficient shielding structure to reduce the flux of neutron and gamma rays which may induce the noise.For this purpose,a method employed genetic algorithms and MCNP code was established to develop the shielding structure.As a typical case,the D-D fusion neutron source and BGO detector were adopted in this study.Three shielding structures with different thickness were obtained.The results showed that,these shielding structures have the better performance than the common shielding structures.

Key words: shielding structure, neutron-gamma well logging, BGO, MCNP

CLC Number: 

  • TL77