辐射防护通讯 ›› 2018, Vol. 38 ›› Issue (3): 1-5.

• 研究通报 •    下一篇

一种旋转式血液辐照仪漏射线束的MCNP计算方法

王棋赟1, 2, 李建军2   

  1. 1.国家电投集团远达环保工程有限公司, 重庆, 401122;
    2.四川大学建筑与环境学院, 成都, 610065
  • 收稿日期:2017-12-15 出版日期:2018-07-20 发布日期:2020-07-29
  • 通讯作者: 李建军, 男, 博士; 教授。
  • 作者简介:王棋斌贝(1984— ), 男, 2007年毕业于四川大学核工程与核技术专业, 学士; 四川大学建筑与环境学院环境专业工程硕士在读; 注册核安全工程师。

MCNP Method for Calculating Leakage Dose of a Revolving Blood Irradiator

Wang Qiyun1, 2, Li Jianjun2   

  1. 1. SPIC Yuanda Environmental Protection Engineering Co., Ltd., Chongqing, 401122;
    2. Architecture and Environment College of Sichuan University, Chengdu, 610056
  • Received:2017-12-15 Online:2018-07-20 Published:2020-07-29

摘要: 旋转式血液辐照仪因为其特殊的结构设计, 在固定屏蔽构件和旋转屏蔽构件之间存在一定的缝隙, 项目环评中对此缝隙造成的漏射剂量常被重点关注。本文通过蒙特卡罗方法针对这种旋转式血液辐照仪的漏射线束进行了计算, 证明在估计2 mm宽的缝隙情况下, 仪器表面接触剂量率满足医药行业标准的要求。

关键词: 血液辐照仪, 漏射线束, 蒙特卡罗方法

Abstract: Due to its special design, there are some gaps between the fixed and rotating shielding components of a rotary blood irradiator. In the EIA process of programs of such kind, the leakage dose resulted from this defect is often paid more attention. The Monte Carlo method was employed to calculate the dose. It's confirmed that, in the case of a 2 mm wide slit, the contact dose rate meet requirements of pharmaceutical industry standards.

Key words: Blood irradiator, Leakage dose, Monte-Carlo method

中图分类号: 

  • TL99