核级树脂硼饱和状态下的动力性能试验

辐射防护通讯 ›› 2015, Vol. 35 ›› Issue (1): 33-34.

• 宁德核电厂第一次大修专题(二) • 上一篇下一篇

核级树脂硼饱和状态下的动力性能试验

严卫龙, 胡向盟

宁德核电有限公司, 福建福鼎, 355200

收稿日期:2014-08-20 出版日期:2015-02-20 发布日期:2025-02-11
作者简介:严卫龙(1978- ),男,2005年毕业于华北电力大学应用化学专业,学士; 助理工程师。

Power Performance Testing of Nuclear Grade Resin under Boron Saturation

Yan Weilong, Hu Xiangmeng

Ningde Nuclear Power co.,Ltd., Fujian Fuding, 355200

Received:2014-08-20 Online:2015-02-20 Published:2025-02-11

摘要/Abstract

摘要： 研究硼酸在核级锂型混合树脂上的饱和吸附,以及硼饱和后温度对树脂饱和度的影响和不同硼酸浓度下的硼饱和树脂的硼释放。结果表明,该树脂对硼酸有较长的吸附过程,硼溶液通入到树脂11倍体积时,树脂趋于饱和;当水流温度上涨时,树脂有一定的硼释放;不同硼浓度对树脂有一定的硼释放,当流出液到树脂6倍体积时,树脂达到新的平衡。

关键词: 核级树脂, 硼, 动力性能

Abstract: This study deals with the saturation and adsorption of boric acid onto nuclear grade lithium resin , the effect of temperature on saturability resulting from saturated resin boron, and boron releaseat different concentrations of boric acid. The results have shown that that theboric acid onto resin is a longer process; resin tends to be saturated when boric solution reaches elevenfold volume of resin; a certain degree of boron release appears when water flow temperature rises; a new equilibrium is reached when effluent reaches sixfold volume of resin.

Key words: Nuclear grade resin, Boron, Dynamic performance

中图分类号:

TL353⁺5

严卫龙, 胡向盟. 核级树脂硼饱和状态下的动力性能试验[J]. 辐射防护通讯, 2015, 35(1): 33-34.

Yan Weilong, Hu Xiangmeng. Power Performance Testing of Nuclear Grade Resin under Boron Saturation[J]. RADIATION PROTECTION BULLETIN, 2015, 35(1): 33-34.

核级树脂硼饱和状态下的动力性能试验

Power Performance Testing of Nuclear Grade Resin under Boron Saturation

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

Metrics

本文评价

推荐阅读 10