中国科技核心期刊

中文核心期刊

CSCD来源期刊

空间控制技术与应用 ›› 2017, Vol. 43 ›› Issue (5): 37-42.doi: 10.3969/j.issn.1674-1579.2017.05.006

• 学术研究 • 上一篇    下一篇

一种可变形桁架避障规划方法*

邓雅,王泽国,张锦江   

  1. (北京控制工程研究所,北京 100190)
  • 收稿日期:2017-02-18 出版日期:2017-10-20 发布日期:2018-01-03
  • 作者简介:作者简介:邓雅(1988—),女,博士研究生,研究方向为航天器控制;王泽国(1988—),男,博士研究生,研究方向为航天器姿态控制;张锦江(1973—),男,研究员,研究方向为航天器控制、制导与仿真.
  • 基金资助:

    *国家重点基础发展计划资助项目(2013CB733100).

A Method on Obstacle Avoidance Planning for Variable Geometry Truss

 DENG  Ya, WANG  Ze-Guo, ZHANG  Jin-Jiang   

  1. (Beijing Institute of Control Engineering, Beijing 100190, China)
  • Received:2017-02-18 Online:2017-10-20 Published:2018-01-03

摘要:   摘要: 为解决VGT的避障规划问题,给出一种等效机械臂模型并分析单级VGT正向递推运动学中的冗余问题.针对等效模型,利用遗传算法设计避障规划算法得到等效模型变量,再反算VGT各级可调杆长度得到VGT的避障算法.所得结果使得VGT等效机械臂模型各级具有相同的移动关节长度,且相邻两级转动关节角度变化较小.对避障规划结果和VGT到等效模型的变换进行仿真验证对比,验证算法有效性.    

关键词: 关键词: 可变形桁架, 避障规划, 遗传算法, 等效机械臂模型

Abstract:   Abstract:To design the obstacle avoidance planning method for variable geometry truss (VGT), an equivalent manipulator model is proposed. The redundant problem in the forward kinematics of single VGT is analyzed and a truss geometry is obtained with the only solution if each varied link is specified. The obstacle avoidance planning for the equivalent model is designed using genetic algorithm and optimized variables of equivalent model are obtained. Accordingly, the length of each varied link is obtained and the geometry of VGT could also be computed with the forward kinematics. In the optimized geometry of VGT, distances among middle points of fixed links remain constant and angle differences among VGT modules are small. The effectiveness of the proposed algorithm is shown via numerical simulations.  

Key words: Keywords:variable geometry truss, obstacle avoidance, genetic algorithm, equivalent manipulator model

中图分类号: 

  • 中图分类号: V448.2