中国科技核心期刊

中文核心期刊

CSCD来源期刊

空间控制技术与应用 ›› 2013, Vol. 39 ›› Issue (3): 19-23.doi: 10.3969/j.issn.1674-1579.2013.03.004

• 学术研究 • 上一篇    下一篇

一种基于B平面参数的深空天体接近段自主轨道控制方法

  

  • 出版日期:2013-06-24 发布日期:2013-08-27

An Autonomous Orbit Control Method Based on Bplane Parameters during the Phase of Approaching the DeepSpace Celestial Body

  • Online:2013-06-24 Published:2013-08-27

摘要: 针对深空探测接近目标天体段轨道,提出了以B平面参数为制导目标参数的自主轨道控制方法.由自主导航系统确定探测器的当前位置和速度,通过精确轨道动力学积分外推到目标天体的近心点得到B平面误差,利用线性制导公式计算出修正轨道需要的速度增量,并用误差椭圆来统计修正后B平面误差.以火星探测为例进行蒙特卡罗仿真,验证了该方法的正确性.

关键词: 自主轨道控制, B平面, 误差椭圆, 深空探测

Abstract: An autonomous orbit control method using Bplane parameters as targeting parameters is proposed during the phase of approaching the deep space celestial body. First, the navigation system determines the current position and velocity of the spacecraft, which are mapped onto the Bplane to get the deviation from the desired encounter condition by integrating the dynamic model, and then the velocity increment for the orbital correction is derived using linear guidance formula and the error ellipse is utilized to describe the Bplane error. Finally, Monte Carlo simulation results show that the method is capable of guiding the Mars probe to a successful encounter.

Key words: autonomous orbit control, Bplane, error ellipse, deepspace exploration

中图分类号: 

  •