中国科技核心期刊

中文核心期刊

CSCD来源期刊

空间控制技术与应用

• 技术交流 • 上一篇    下一篇

面阵静态红外地球敏感器现场标定

王伟华,邓楼楼,谭民涛,黄澜   

  1. (北京控制工程研究所,北京 100190)
  • 出版日期:2016-06-23 发布日期:2016-06-27
  • 作者简介:作者简介:王伟华(1984—),工程师,研究方向为空间光学敏感器视觉算法设计;邓楼楼(1982—),高级工程师,研究方向为空间光学敏感器总体结构设计;谭民涛(1981—),高级工程师,研究方向为空间光学敏感器光学系统设计;黄澜(1968—),研究员,研究方向为空间光学敏感器总体设计及可靠性方面研究.
  • 基金资助:

    *国家自然科学基金资助项目(51405016).

Field Calibration for Static Array Infrared Earth Sensor

 WANG  Wei-Hua, DENG  Lou-Lou, TAN  Min-Tao, HUANG  Lan   

  1. (Beijing Institute of Control Engineering, Beijing 100190, China)
  • Online:2016-06-23 Published:2016-06-27

摘要:  摘要: 针对面阵静态红外地球敏感器的现场标定,提出基于规则小孔平面靶标的现场标定方法.将小孔平面靶标固定放置于面源黑体前方,在光学视场测量空间内,多次调整红外地球敏感器的摆放位置,以采集多幅不同位置、不同角度的红外靶标光点图像.使用等高层最小二乘椭圆拟合方法精确提取靶标红外光点的中心坐标,获得特征点信息.利用红外靶标图像和图像特征点计算面阵静态红外地球敏感器光学系统的焦距和主点坐标.试验结果表明,该标定方法简单灵活有效,便于调试现场操作.目前,该方法已在面阵静态红外地球敏感器研究中得到应用.

关键词: 关键词: 红外地球敏感器, 现场标定, 平面靶标, 红外光点, 视觉测量

Abstract: Abstract:Based on planar target with regular holes, a field calibration method for static array infrared earth sensor  is proposed. The planar target is placed in front of the surface blackbody, and the target plane is parallel to the surface of the blackbody. In the vision field of static array infrared earth sensor, the infrared earth sensor is placed for several pose. Infrared light spot images of target with different position and attitude are obtained. The infrared spot center location is extracted accurately via a contour least square ellipse fitting algorithm. Feature point coordinate is acquired. Finally, the focal length and principal point coordinate of the static array infrared earth sensor is calculated by using infrared target images and image feature points. Experiment results verify that the proposed method operation is simple and flexible, and easy to test. The proposed method is put into the practice of the research of static array infrared earth sensor.

Key words: Keywords:infrared earth sensor, field calibration, planar target, infrared spot, vision measurement

中图分类号: 

  • TN219